KingDetector High Quality Treasure Hunter Gold Sliver Finder

N/A

Product Information

1. Mode Indicates:Zero, Jewelry, Custom, Relics or Coins, has been selected by highlighting the corresponding word on the LCD screen.
2. Target ID Legend Works in conjunction with the Target ID Cursor to indicate a target’s probable
identity. Ferrous (iron) targets will indicate on the left half, non-ferrous targets that are thin or have
low conductivity will indicate in the middle, and thick or high conductivity targets will indicate at the
right.
3. Target ID Cursor (Upper Scale) The Target ID cursor, in conjunction with the Target ID Legend,
indicates the probable identity of a detected target. The upper scale consists of twelve (12) graphic
segments for Target ID.
4. Lower ScaleThe lower scale, or Notch Discrimination Scale, indicates the discrimination pattern.
This will produce an audible target response for the pixels that are switched on, and no
audible response for those that have been switched off. The Target ID Cursor will always indicate all
targets. The discrimination pattern can be adjusted by changing modes and / or using the DISCRIM
and Accept/Reject (√/×) pushbuttons.
5. Coin Depth Indicator The depth of a coin, or similar sized target, is indicated in 2-inch increments.
Sweep over the target with the search coil 1 inch from the soil to get the most accurate reading.
6. Battery Level Indicator Indicates the current battery condition.
7. Sensitivity Indicator The MD-6350 has eight (8) settings for sensitivity.

KingDetector High Quality Treasure Hunter Gold Sliver Finder Digger Metal Detector Treasure Hunter MD-6350 Advanced Metal Detectors

Buy From Amazon